CCG1000-12D型智能化高粘度灌装机

产品名称:CCG1000-12D型智能化高粘度灌装机
产        地:浙江温州
产品介绍:
 CCG1000-12D型智能化高粘度灌装机
灌装生产线适用物料:种衣剂、悬浮剂、膏霜类等高粘度物料。
1、计量准确:采用伺服系统控制,确保高精度灌装。
2、变速灌装:在灌装过程中,当接近目标灌装容量时可应用变速实现慢速灌装,防止液体溢出瓶口造成污染。
3、调整方便:更换灌装规格仅需在触摸屏中更改参数即可,且所有灌装头一次更改到位。 
微调剂量只需在触摸屏调整。
· 适用瓶径 Φ40-100毫米 
· 瓶    高 80-230毫米 
 
· 计量精度 ±1%(200毫升以内)、±0.5%(200-1000毫升) 
· 灌装容量 80~1000毫升 
 
· 生产能力 ≤5400瓶/小时 
· 气源压力 0.5-0.7兆帕 
 
· 耗 气 量 200升/分 
· 电    源 ~220伏、50赫兹 
 
· 总 功 率 2.5千瓦 
· 重    量 约900公斤 
 
· 外形尺寸 2000×1050×2300(L×W×H)毫米 
 
Model CCG1000-12D Intellectualized High-viscosity Filler
Applicable Material: seed coating, SC, Cream high-viscosity materials etc.
1. Accurate measurement: The servo control system to ensure that the total can reach a constant position of the piston.
2. Variable speed filling: In the filling process, when close to the target filling volume to achieve   a slow speed can be applied when filling, to prevent fluid overflow bottle pollution.
3. To facilitate the adjustment: Replacement of filling in the  specifications only in the touch screen you can change the parameters, and all the filling for the first time changes in place.
Fine-tune the dose on touch screen to adjust.
· Apply to the bottle diameter Φ40-100 mm 
· Height for bottle 80-230mm 
 
· Measure precision ±1%(≤200ml)、±0.5%(200-1000 ml) 
· Volume 80~1000 ml 
 
· Production capacity ≤5400 b/h 
· Air pressure 0.5-0.7 Mpa 
 
· Amount of Air-consuming 200 l/min 
· Power source ~220 V、50 Hz 
 
· Total power 2.5 KW 
· Weight about 900 kg 
 
· External dimensions 2000×1050×2300(L×W×H) mm 


 

CCG5000-6D型智能化高粘度灌装机
产品名称:CCG5000-6D型智能化高粘度灌装机
产        地:浙江温州
产品介绍:
 CCG5000-6D型智能化高粘度灌装机
灌装生产线适用物料:种衣剂、悬浮剂、膏霜类等高粘度物料。
1、计量准确:采用伺服系统控制,确保高精度灌装。
2、变速灌装:在灌装过程中,当接近目标灌装容量时可应用变速实现慢速灌装,防止液体溢出瓶口造成污染。
3、调整方便:更换灌装规格仅需在触摸屏中更改参数即可,且所有灌装头一次更改到位。 
微调剂量只需在触摸屏调整。,,,
· 适用瓶径 圆瓶  Φ60-140毫米 扁瓶 最小 60×60×100毫米   最大 140×200×340毫米 
· 计量精度 ±0.5% 
 
· 灌装容量 1000~5000毫升 
· 生产能力 ≤2000瓶/小时 
 
· 气源压力 0.5-0.7兆帕 
· 耗 气 量 120升/分 
 
· 电    源 ~220伏、50赫兹 
· 总 功 率 2.5千瓦 
 
· 重    量 约900公斤 
· 外形尺寸 2000×1150×2300(L×W×H)毫米 
CCG5000-6D intellectualized high-viscosity filler
· Apply to the bottle diameter Round bottle  Φ60-140 mm Flat bottle  Min 60×60×100 mm   Max 140×200×340 mm 
· Measure precision ±0.5% 
 
· Volume 1000~5000 ml 
· Production capacity ≤2000 b/h 
 
· Air pressure 0.5-0.7 Mpa 
· Amount of Air-consuming 120 l/min 
 
· Power source ~220 V、50 Hz 
· Total power 2.5 KW 
 
· Weight bout 900 kg 
· External dimensions 2000×1150×2300(L×W×H) mm 
ZH-4J型注射式灌装机

产品名称:ZH-4J型注射式灌装机
产        地:浙江温州
产品介绍:
 ZH-4J型注射式灌装机
本产品是直线注射式膏液灌装机采用PLC和触摸屏自动化控料具有计量准确,结构先进、运转平稳,噪声低,调节范围大灌装速度快等优点。而且对易挥发,易结晶,易起泡的液体,对橡胶,塑料有极强腐蚀的液体,以及对高粘度高密度的液体半流体都能适应。本机在料箱部分特地加装了搅拌装置,对有酱料能边搅拌边灌装。 本机外露部分及液料接触部位均采用优质不锈钢制造表面进行了抛光处理,外形美观大方不污染环境,符合GMP标准要求     
 
灌装生产线技术参数
电源: AC 220V 50Hz
功率: 1kw
配备气源: 0.6MPa稳定气源
瓶口最小直径: Ф40mm
适用瓶子直径: Ф40mm~Ф100mm
适用瓶子高度: 60mm~230mm
适用物料: 不含顽固颗粒的酱体
生产能力: 800瓶/小时
重量: 460kg
外形尺寸: 2000mm×1100mm×1900mm
 
 
ZH-4J Soy Sauce Filling Machine
This inline type of filler is best suited for viscous products including easily volatilized liquid, easily concreting liquid, and easily foaming liquid, and also suited for strong corrosive chemicals to rubber and plastic.In additional,it is also suited for paste and semi-paste product. This machine is also made to meet food-grade standards and can also handle various chemical:such as heavy sauce, salsa, salad dressing, cosmetic cream, heavy shampoo, gel, paste cleaner and waxes, adhesive,heavy oil and lubricant. It is automatically controlled by computer (PLC) and touch screen control panels. Advance structure, highly reliable, low noise, wide regulating range and high filling speed The material storing tank of the machine has been specially added the churn-dasher, it can churn up and fill at the same step. All the parts touching the material are made of advanced SS,also applied to GMP standard requirement.     

Technical Parameter
power supply:AC220V(three phase); 50Hz
power: 1 kW
pneumatic (air-operated)source: 0.6MPa clean and stable compressed air
the Min diameter of bottle mouth: Ф30mm
suitable bottle diameter : Ф40mm~Ф100mm
suitable bottle height: 60mm~230mm
suitable filling material:no hard granule within the sauce
production capacity: 800 bottles/hours
weight: 460 KGS10.mainunit dimension(L×W×H): 2000mm×1100mm×1900mm
 

CZ-6液体称重灌装机
产品名称:CZ-6液体称重灌装机
产品类型:半自动流体灌装机系列
产        地:浙江温州
产品介绍:
CZ-6液体称重灌装机

本机适用于对流体10kg~50kg的计重量灌装,自动完成计数进瓶、计重量灌装、输送出瓶等一系列操作。特别适用于水剂、食用油、润换油的定量灌装,是食品、医药、化妆品以及精细化工等行业的理想包装机。
灌装生产线主要特点
◆本机采用可编程控制器(PLC)、触摸屏进行操作控制、使用调节方便。
◆每个灌装头均有称重和反馈系统,能对每一个头的灌装量进行灌装量设置和单个微量调整。
◆光电传感器、接近开关等采用的都是先进的传感元件,做到无桶不灌装,堵桶主机会自动停机并报警。
◆灌装方式为下潜式,可有效减少泡沫的产生,可以满足不同特性物料的灌装。
◆整机按GMP标准要求制作,各管路连接采用快装方式,拆卸清理方便快捷,与无聊接触部位及外露部分均采用优质不锈钢材料制造。整机安全、环保、卫生、美观、能适应各种不同环境的工作。
◆此灌装机适用于5kg 到30kg 液体。 
◆ 各灌装头都有反馈系统,可以分别调整。
◆ 采用PLC以及触屏控制。
◆ 采用潜入式灌装减少泡沫。
主要技术参数
· 适用瓶径 最小140×200×320毫米、最大260×290×500毫米 
· 计量精度 ±0.2% 
 
· 灌装容量 5~30公斤 
· 生产能力 ≤600桶/小时 
 
· 气源压力 0.5-0.7兆帕 
· 耗 气 量 120升/分 
 
· 电    源 ~220伏、50赫兹 
· 总 功 率 1千瓦 
 
· 重    量 约500公斤 
· 外形尺寸 2900×1350×2300(L×W×H)毫米 
 
CZ-6 Automatic Scale Fixed-quantity filing machine
 
This weighing filling machine is for filling 10kg to 50kg liquid. It automatically achieves counting inlet bottle, gravity filling, and bottle outlet. It is especially good for filling SL, edible oil and lubrication. It is a nice choice for foodstuff pharmacy, cosmetic and chemical industries. 
Major Characteristics:

◆This weighing filling machine is for filling 5kg to 30kg liquid.. 
◆ Each filling head has the weigh and feedback system, each filling head can be regulated
◆This type filler adopts PLC to control, touch screen control panel
◆ It applies dive method to fill and it reduces foam.
◆ This machine adopts PLC and touch screen control panel, so it is convenient to set. 
◆ Each filling head has the weigh and feedback system, each filling head can be regulated.
◆ Photoelectric sensor, approximate switch and other electric elements are of the international famous brands. It ensures no container miss filling. The host machine will alarm if there is any container blocked.
◆It applies dive method to fill and it reduces foam; it is suitable for various kinds of filling products.
◆ The whole machine meets GMP standard, it is easy to clean and maintain, and the parts which contact with the filling material are made of high quality stainless steel. The whole machine is safe, eco-friendly and sanitary. It adapts to various kinds of working places.

 Main Performance parameter:

· Apply to the bottle diameter Min140×200×320 mm、Max260×290×500 mm 
· Measure precision ±0.2% 
 
· Volume 5~30 Kg 
· Production capacity ≤600 buckets/h 
 
· Air pressure 0.5-0.7 Mpa 
· Amount of Air-consuming 120 l/min 
 
· Power source ~220 V、50 Hz 
· Total power 1 KW 
 
· Weight about  500 kg 
· External dimensions 2900×1350×2300(L×W×H) mm 
ZH-FF-2 型双排直线防腐灌装机
产品名称:ZH-FF-2 型双排直线防腐灌装机
产        地:浙江温州
产品介绍:
ZH-FF-2 型双排直线防腐灌装机
  本机采用PLC可编程控制,W.6英寸触摸屏人机界面系统,集光电传感、自动补偿、气动执行于一体的高科技灌装设备。两排灌装系统可同时进行灌装不同的液体,并设有下潜防高泡提升灌装之功能,计量精确,是广泛用于烫发水等2合1高泡、防腐液体的理想灌装设备。
 
  灌装生产线功能特点:
  ◆双排灌装系统可提高灌装速度,并避免同瓶型不同溶液的混乱交叉;
  ◆可根据不同瓶型在数分钟内完成切换,调整方便;
  ◆用户可根据产量要求选择灌装头数,无需备件;
  ◆每个灌装头设有卡瓶装置,确保灌装定位精确。
  ☆可选配以夹瓶下压式拧盖机或自动旋盖机进行旋盖;
  ☆用美国防腐气动隔膜泵,自动补料。
 
主要技术参数:
适用瓶径: 40-100mm
计量精度: ±1%
灌装容量: 40-300ml
生产能力: ≤2500b/h (one side 6head)can add to 10.16.20 head
气压: 5kg
功率: 0.5kw
重量: 300kg
外型尺寸: 2000*1000*2300mm(L*W*H)
 
 
ZH-FF-2 Model double-row straight line anticorrosive filling machine
  The machine is a kind of high-tech filling device adopting PLC programmable logic control, W.6 inch touch screen human machine interface system, and integrating photoelectric sensing, automatic compensating and pneumatic actuating. The two-row filling system can fill different liquids simultaneously. It is also provided with the function of submersible filling without foaming during the filling with accurate measurement. It is an ideal device widely used for hair perm lotion etc. two-in-one high foam anticorrosive liquids.
 
  Feature:
  ◆ The double-row filling system can enhance the filling speed and avoid mixture of different solutions in same types of bottles.
  ◆ Switching can be completed within several minutes according to different types of bottles with convenient adjustment.
  ◆ User can choose filling head number according to output requirements without the need of any spare parts.
  ◆ Every filling head is provided with bottle clamping device to ensure an accurate filling position.Bottle clamping and down pressing type screw capping machine or automatic capping machine is optional for capping operation.American anticorrosive pneumatic diaphragm pump is adopted for automatic material adding.
 
Technique Parameter:
Applicable bottle drive: 40-100mm
Measurement accuracy: ±1%
Filling capacity: 40-300ml
Production capacity: ≤2500b/h (one side 6head)can add to 10.16.20 head
Pressure: 5kg
Power: 0.5kw
Weight: 300kg
Machine Size: 2000*1000*2300mm(L*W*H)
ZH-FF 全自动防腐直线式灌装机

产品名称:ZH-FF 全自动防腐直线式灌装机
产        地:浙江温州
产品介绍:
ZH-FF 全自动防腐直线式灌装机
   本系列灌装机是我公司研制的一种全防腐型(PLC)程序控制,光电传感、气动执行于一体的高新技术灌装机。本机专用于强腐蚀性液体及化妆品类不能接触金属液体灌装。设备所接触到液体的部位均采用非金属抗腐蚀材料加工制作。并设计有下潜灌装之功能。计量精确,灌装时无气泡、无垂涎。
  灌装生产线特点:
◆整机物料接触部分材质可据产品特性做专门配置,因而适合绝大多数强腐蚀性产
    品的灌装。如选PVC料斗,即成为理想的冷烫精灌装机。
◆如配合防滴漏的升降灌装系统,即成为高泡水剂产品的理想灌装机型。
◆具有定时灌装、无瓶不灌、灌装数量记数等特点。
◆维护便利,无须任何特殊工具。
◆用美国防腐气动隔膜泵,自动补料。
 
主要技术参数:
型号:  ZH-FF12G(LM-FF16G)
灌装速度:16G(120b/m , less than 500ml )
计量精确度:±1%
工作气压:6-7kg/c㎡
外形尺寸:2000*810*2200mm
 
 
ZH-FF Full-automatic anticorrosive straight line type filling machine
  The series filling machine is a kind of full-anticorrosive (PLC) program controlled high-tech filling machine with photoelectric sensing and pneumatic actuating researched and developed by our company. The machine is specially used for filling strong corrosive liquids and liquids such as cosmetics that can't contact the metal. The parts of the machine that contact the liquids are all made of nonmetal anticorrosive materials. It is designed with submersible filling function, featured by accurate measurement and no bubble and drooping during the filing.
  Features:
  ◆The parts in the whole machine that contact the materials can be specially allocated according to product features. Therefore, it is suitable for filling most strong corrosive products. If it is added with PVC bucket, it will become an ideal cold wave fine filling machine.
  ◆ If combined with lifting filling system with anti-dripping function, it will become an ideal filling machine for high foam water injection products.
  ◆ It has such features as timed filling, no filling in case of no bottle, counting of filling volume etc.
  ◆ It can be conveniently maintained without any special tools.
American anticorrosive pneumatic diaphragm pump is adopted for automatic
material adding.
 
Technical Parameter:
Model:ZH-FF12G(LM-FF16G)
Filling Speed:16G(120b/m , less than 500ml )
Filling Accuracy:±1%
Working Pressure:6-7kg/c㎡
Machine Size:2000*810*2200mm

 


 

ZH-HS 全自动直线式活塞灌装机
产品名称:ZH-HS 全自动直线式活塞灌装机
产        地:浙江温州
产品介绍:
ZH-HS 全自动直线式活塞灌装机
 
  本系列注射式/常压重力式两用灌装机是我公司研制的一种高技术产品。它可适用于不同粘度的水剂、半流体、膏体类产品,广泛应用于食品、化妆品、医药、油脂、日化、洗涤剂、农药、化工等各个行业产品灌装。采用直线灌装方式,可用于不同类型的溶液灌装。无需增添任何备件。
 
  灌装生产线特点:
  ◆该系列机型设计紧凑合理,外型美观大方;
  ◆选取用国际名牌电器元件配制。主动力气缸选用德国费斯托(FESTO)双作用气缸和磁性开关。日本三菱公司PLC电脑、欧姆龙光电、台湾产触摸屏,确保了其出色的质量与持久稳定的性能;
  ◆该机维护便利,无需任何工具,便可轻易拆卸清洗安装,调节方便。调整计量,可先大范围调整到接近计量,再进行微调。能做到无瓶、缺瓶不灌装,计量精确;
  ◆本机灌装系统均采用卡箍式快装卫生接头。整个缸体从上到下无须工具即可轻易拆卸清洗安装。结构设计简单、操作维护方便。
 
主要技术参数:
型号: ZH-HS(6head ,8head ,10head )
灌装速度: 80-100b/min(250ML/10head )
灌装精度: ±1%
缸体规格: 25-250ML. 50-500ML.100-1000ML.250-2500ML
工作气压: 5-7KG/㎡
机器净重: 950KG
外形尺寸: 2000*810*2200MM
 
 
ZH-HS Full-automatic straight line type piston filling machine
  The series injection type/normal pressure gravity type dual-use filling machine is a high-tech product researched and developed by our company. It is suitable for products of various viscosity such as water injection, semi-fluid and ointment etc. It is widely applied for filling of products in such industries as food, cosmetics, medicine, grease, daily chemical industry, detergent, pesticide and chemical industry etc. By adopting straight line filling mode, it can be used to fill solutions of different types without the need of adding any spare parts.
 
  Feature:
  ◆The series machine is compact and reasonable in design and beautiful and decent in appearance.
  ◆It is made of electrical components of internationally famous brands. The main actuating cylinder adopts Germany FESTO dual actuating cylinder and magnetic switch. Japan Mitsubishi PLC computer, Omron phototube and touch screen made in Taiwan, all of which have guaranteed the excellent quality and consistently stable performance of the machine.
  ◆The machine can be maintained conveniently. It can be easily assembled, disassembled and cleaned without any tools. The adjustment is convenient. For the measurement adjustment, firstly adjust at large scale to be close to the measurement and then carry out fine adjustment. It can be realized that no filling in case of no bottle or insufficient bottle and accurate measurement.
  ◆The filling system of the machine adopts ferrule type rapid installation sanitary connector. The whole cylinder can be easily assembled, disassembled and cleaned from top to bottom without any tools. The structure is simple in design and convenient in operation and maintenance.
 
 Technical parameter:
Model: ZH-HS(6head ,8head ,10head )
Filling speed: 80-100b/min(250ML/10head )
Filling precision: ±1%
Cylinder specification: 25-250ML. 50-500ML.100-1000ML.250-2500ML
Working pressure: 5-7KG/㎡
N.W: 950KG
Dimension: 2000*810*2200MM
 
 
bottom:0pt; margin-top:0pt; " >
ZHK 颗粒酱灌装机

产品名称:ZHK 颗粒酱灌装机
产        地:浙江温州
产品介绍:
 ZHK颗粒酱灌装机
ZHK颗粒浆状灌装机是本公司采用先进灌装机技术的基础上,进行改造和创新设计的产品,其结构简单、精确度高、操作更加简便。
适用于医药、日化、食品、农药及特殊行业,是理想的颗粒浆状粘度流体充填设备。
该机为半自动活塞式灌装机,可灌装颗粒浆状流体物料。
该机设计合理,机型小巧,立式结构,节省场地。
操作方便,气动部分均采用德国FESTO和台湾AirTac的气动元件。
物料接触部分均采用316L不锈钢材料制成,符合GMP要求。
灌装阀由气动阀控制,灌装精度更高。
灌装量和灌装速度均可任意调节。
灌装闷头采用防拉丝及升降灌装装置。
灌装生产线技术参数
生产速度: 5-20瓶/分
装量精度: ≤ ±1﹪
空气压力: 0.4—0.6mpa
可选机型: 25-60ml 50-125ml 100-250ml 200-500ml 400-1000ml 900-2500ml 2200-5000ml
 
ZHK Granule Paste Filling Machine
The model ZHK is a vertical bag-making, filling and sealing machine, widely used for packing granules and powdery non-adhesive materials, such as gourmet power, coffee, powdery detergent and instant drinks.
With the stepping motor subdivision technology adopted for the bag- making system, the accuracy of the system, with errors less than 1mm, is high.
This machine is the Semi-automatic Piston Type Ointment Filling Machine, can fill granule viscous fluid material.
This machine is reasonable in design, small in model, vertical structure, saving the place.
Easy to operate, the pneumatic part adopts the pneumatic components of Germany FESTO and Taiwan AirTac.
Filling valve is controlled by the electromagnetic valve, filling accuracy is higher.
Filling volume and filling speed can be adjusted at will
Filling head adopts anti-pull and lifting filling device.
Technical Parameter
Produce speed: 5-20bottles/min
Filling precision: ≤±1﹪
Air pressure: 0.4—0.6mpa
Optional Model: 25-60ml 50-125ml 100-250ml 200-500ml 400-1000ml 900-2500ml 2200-5000ml

 

ZH-Z-12D 直列活塞式灌装机

产品名称:ZH-Z-12D  直列活塞式灌装机
产        地:浙江温州
产品介绍:
ZH-Z-12D  直列活塞式灌装机
本机适用于各种不含气流体、半流体的定量灌装.自动完成计数进瓶、定量灌装、输送出瓶等一系列操作.特别适用于水剂、乳剂、悬浮剂、食用油、润滑油的定量灌装,是食品、医药、化妆品以及精细化工等行业的理想包装机械.
灌装生产线主要特点
◆本机采用可编程序控制器(PLC)进行控制,触摸屏操作,具有调节方便,适用范围广等特点.
◆本机采用先进的机电一体化技术,更换任意一种灌装规格只需在触摸屏中修改参数,能同时对12个头的灌装进行大幅度的整体调整,也能对每一个头的灌装量进行单个微量调整.
◆应用触摸屏技术,使机器的操作更可靠,方便,人机界面更加友好.光电传感器,接近开关等采用的都是先进传感元件,做到无瓶不灌装,堵瓶主机会自动停机并报警.
◆灌装方式为下潜式,选用不同材质密封货塞环,可以满足不同特性物料的灌装.
◆整机按GMP标准要求制作,各管路连接采用快装方式,拆卸清洗方便快捷,与物料接触部位及外漏部分采用优质不锈钢材料制造.整机安全,环保,卫生,美观,能适应各种不同环境的工作。
技术参数
外形尺寸:2000mm(长)1100mm(宽)2200mm(高)
灌装头数:12头
适用瓶型:直径:φ40mm~φ100mm   高度:80mm~300mm
瓶口直径:≥φ18mm
包装规格:50ml~1000ml
生产能力:≤6000 瓶/小时(以水为介质)
计量误差:50ml-100ml≤±1ml 100ml~500ml±0.5% 500ml~1000ml±0.3%
配备电源:220V;50HZ
主机功率:1.5kw
配备气源:0.55Mpa~0.65Mpa 洁净稳定气源
 
ZH-Z-12DPLC Controlled Piston Filling Machine
 This is our newly developed filling machine, the whole parameters have matched the international advanced level, especially, the partial have exceeded the relative line aboard, also certified by the world famous chemical magnate.
 Feature:
◆This is an inline piston filling machine for cream and liquid. PLC and touch screen ◆control panel are used to control material filling.
◆Accurate measuring, advanced structure, stable operating, low noise, large adjusting range, and fast filling speed.
◆It is also suitable for materials that are easily volatilizing, easily crystallizing or easily bubbling; strong corrosive liquid for rubber, plastic, high viscous liquid, and semi-flow liquid.
◆Adjust and meter value in the control panel of touch screen, meanwhile, each filling head also can be adjusted.
◆The external surface of this machine is made of excellent stainless steel.
Good appearance, apply to GMP standard.      
Technical Parameter
mainunit dimension (L×W×H) : 2000mmX1100mmX2200mm
filling heads : 12
bottle  size Diameter:φ40mm~φ100mm   High:80mm~300mm
bottle mouth size:≥φ18mm
filling volume: 50ml~1000ml
production capacity: ≤6000 p/h
error range: 50ml-100ml≤±1ml 100ml~500ml±0.5% 500ml~1000ml±0.3%
power supply: 220V;50HZ
Power: 1.5kw
pneumatic (air-operated)source: 0.55Mpa~0.65Mpa


 

ZH-ZX-3 全自动自吸式活塞灌装机
产品名称:ZH-ZX-3 全自动自吸式活塞灌装机
产        地:浙江温州
ZH-ZX-3 全自动自吸式活塞灌装机
  本机采用PLC可编程控制,W.6英寸触摸屏人机界面系统,集光电传感、自动吸料、气动执行于一体的高科技灌装设备。对三种不同的物料可同时灌装,吸料方便、快捷,是离子烫1、2、3号物料灌装的理想设备。
 
  灌装生产线功能特点:
  ◆同时灌装三种不同的物料;
  ◆自吸式吸料,吸料方便;
  ◆可根据不同的瓶型在数分钟内完成切换,调整方便;
  ◆每个灌装头设有卡瓶装置,确保灌装定位精确。
 ◆可选配以夹瓶下压式拧盖机或自动旋盖机进行旋盖;
 
  主要技术参数:
适用瓶径: 40-100mm
计量精度: ±1%
灌装容量: 40-1000ml
生产能力: ≤180b/h
气压: 5kg
功率: 0.5kw
重量: 300kg
外型尺寸: 2000*1000*2300mm (L*W*H)
 
ZH-ZX-3 Full-automatic self-suction type piston filling machine
  The machine is a kind of high-tech filling device adopting PLC programmable logic control, W.6 inch touch screen human machine interface system, and integrating photoelectric sensing, automatic material sucking and pneumatic actuating. It can fill three kinds of different materials simultaneously. With convenient and rapid material sucking, it is an ideal device for filling No. 1, 2, 3 materials for ion hair burning.
 
  Feature:
  ◆ Filling three kinds of different materials simultaneously.
  ◆ Self-suction type material sucking, which is convenient.
  ◆Switching can be completed within several minutes according to different types of bottles with convenient adjustment.
  ◆Every filling head is provided with bottle clamping device to ensure an accurate filling position.
Bottle clamping and down pressing type screw capping machine or automatic capping
machine is optional for capping operation.
 
Technique Parameter:
Applicable bottle diameter: 40-100mm
Measurement accuracy: ±1%
Filling capacity: 40-1000ml
Production capacity: ≤180b/h
Pressure: 5kg
Power: 0.5kw
Weight: 300kg
Dimension: 2000*1000*2300mm (L*W*H)